FORM-A-TREAD Company

Phoenixville,  PA 
United States
http://www.form-a-tread.com
  • Booth: 1408


Increase safety with Form-A-Tread!

Form-A-Tread is a Form-in-Place tread-making epoxy used to increase safety on stairs, ramps, walkways, wet areas, irregular surfaces, and any place where additional foot or vehicle traction and visibility are needed. 

Form-A-Tread contains a slip-resistant aggregate, providing years of service. It can be used indoors and outdoors and is exceptionally durable in areas exposed to chemical, weather, and temperature extremes. Its paste (no drip) consistency makes it clean and easy to use, even on sloped and irregular surfaces. Form-A-Tread adheres to a wide variety of porous and non-porous surfaces like concrete, stone, brick, wood, fiberglass, and metal (no priming needed). 

Form-A-Tread GLOW is a patented, Glow in the Dark, anti-slip epoxy that is applied to leading edges of steps, landings, and any place where visibility and traction in low light or blackout conditions are needed. GLOW is ICC 2009 / NYC Buildings 2014 Construction Code compliant and meets or exceeds the requirements of ASTM E 2072.

Form-A-Tread Self Leveling combines epoxy binder with colored aggregate to create a decorative, non-skid surface on larger surfaces like walkways and floors.

Brands: Form-A-Tread, Form-A-Tread GLOW, Form-A-Tread Self Leveling, Tread Grit


 Press Releases

  • Phoenixville, PA -- Dec. 1, 2020 -- Form-A-Tread was named a Top Product of 2020 by the editors of Building Services Management Magazine in their December 2020 issue. 

    Form-A-Tread -- the flagship product of Form-A-Tread Company -- is a customizable, one hundred percent epoxy paste that bonds permanently to concrete, stone, wood, metal, epoxy or PU coating, on any interior or exterior building surface. With low odor and 0% VOC, its forumla is safely and easily installed by facilities personnel. It is chemical and abrasion resistant, and proven to withstand weather extremes, ice melt chemicals, snow shovels, and the wear and tear of heavy pedestrian and vehicle traffic.

    Bob Finkenaur, founder and president of Form-A-Tread Company, developed his product in 2015 in response to a need for a more durable and cost-effective anti-slip solution in the workplace. "Traditional tapes and paints don't work well," says Finkenaur. "They chip and peel and need to be replaced about every six months. Our product has more than ten times the durability of traction tape or paint, so it performs well and looks great for years. Most of our customers -- including Disney World, Yankee Stadium, AMTRAK, and Madison Square Garden -- have an extremely high volume of employee and customer traffic, and they're very happy with Form-A-Tread."

    In addition to its flagship product, Form-A-Tread Company also manufactures and sells Form-A-Tread GLOW, a patented photoluminescence and slip-resistant formulation designed for emergency egress; and Form-A-Tread SL (Self Leveling), an epoxy binder combined with colored aggregate to create a decorative, non-skid surface on walkways, ramps, floors and other larger areas. 

    To learn more about Form-A-Tread, visit their website at http://www.form-a-tread.com


 Products

  • Form-A-Tread
    Form-A-Tread is a customizable, 100% epoxy safety tread that is applied and bonds permanently to concrete, stone, wood, metal, epoxy or PU coating, on interior or exterior building surfaces.
    ...

  • Our unique, form-in-place, no-drip epoxy paste creates custom and permanent treads on stairs, walkways, sloping surfaces, and any place where additional traction and/or visibility are needed -- including wet surfaces. Because of its paste consistency, it can be applied on sloped and irregular surfaces and adheres to a wide variety of porous and non-porous surfaces -- including concrete, stone, wood, metal, epoxy or PU coating, on interior or exterior building surfaces -- with no priming required. It is chemical and abrasion resistant, and proven to withstand weather extremes, ice melt chemicals, snow shovels, and the daily wear and tear of heavy pedestrian and vehicle traffic. With low odor and 0% VOC, its formula is safely and easily installed by facilities personnel. 
  • Form-a-Tread GLOW
    GLOW is a patented, fast curing, photoluminescent and slip-resistant 100% epoxy formula that creates permanent safety egress path marking on the horizontal leading edge of steps and buildings....

  • Applied with a single coat to the horizontal leading edge of indoor steps and landings, Form-A-Tread GLOW is 2015 ICC IBC and 2014 NYC Construction Code BC 1024.4 compliant, and meets or exceeds the requirements of ASTM E 2072. GLOW is intended for indoor use and can also be used in theatre and other entertainment venues to increase safety and visibility on steps, landings, ailes and risers after the house lights are dimmed. 
  • Form-A-Tread SL
    Form-A-Tread SL (Self Leveling) combines liquid epoxy with colored aggregate to create a decorative, non-skid surface on walkways, ramps, floors and other larger areas....

  • Form-A-Tread SL is a safety demarcation and decorative coating solution used to provide a highly durable, colorized, non-skid surface on walkways, ramps, floors, and other areas where demarcation and traction is needed for pedestrian and vehicle traffic. Comprised of two components -- liquid epoxy binder and specialized colored aggregates -- Form-A-Tread SL is moisture tolerant, extremely durable, and has high strength, making it perfect for high-traffic areas. SL is easy to mix and apply due to its convenient packaging, 1:1 ratio and low to medium viscosity. 
For Technical Support with this webpage, please contact support.