Belt Conveyor Guarding

EASY TO INSTALL

• Install and remove the guard in seconds
• No welding or drilling required for installation
• Secure in place using supplied hardware for industrial applications or a padlock for commercial applications
• Standard size fits most applications
• Custom ladder guards available upon request
• Includes handles. As a result, better ergonomics achieved

BUILT TO LAST

• Powder coated safety yellow for durability and high visibility
• Available in mild steel, stainless or aluminum

EASY TO INSTALL

• Standard and custom sizes available
• Mounts easily with 2 or 4 wedge clamps (other options available)
• Leg, Rail, & Bracket Mounting Options aid in positioning around obstructions
• Easy maneuverability due to lightweight fabrication
• Custom Guards are ready for install (no field fitting required)

EASY TO MAINTAIN

• Guards remove in seconds for equipment access
• Simplified installation and removal of safety guards because of the individual panels
• Standardly sized guards are, consequently, interchangeable

BUILT TO LAST

• Heavy-duty steel construction
• Powder coated for increased durability
• Available in stainless steel for highly corrosive areas

COMPLIANT

• Keeps workers away from danger zones and pinch-points
• Meets OSHA, MSHA and Canadian Safety Standards for machine safety guarding
• Complies with ANSI b11.19-2010 performance requirements for design, construction, installation, operation and maintenance of safeguarding

ERGONOMIC DESIGN FEATURES & ADDITIONAL OPTIONS

• Guard Handles: Ergonomically friendly handles for easy lifting and repositioning of guards. Therefore, there are fewer workplace injuries
• Wedge Clamps: Eliminate the repetitive motion of tightening and loosening fasteners
• Service/Inspection Doors: Eliminate the need to remove the entire guard. Hence, it easy to access a specific area of the equipment
• Guard Hangers: Solve the problem of where to put your guard when removed for maintenance
• Mounting Legs, Rails & Brackets: Great for getting past obstructions
• Hinged Access/Entry Doors: Eliminate the need to remove the entire guard
• Visibility: Allows for inspection without removing the guard due to increased visibility through the guard
• Weight Labels: Creating a visual cue of guard weight before you lift
• Laser Cut Identification: Easily reference equipment when performing maintenance tasks. As a result – no lost equipment or time to look for it

EASY TO INSTALL

• Self-supporting, adjustable design
• Custom fit for each application
• As a result, no welding or cutting required
• Adjustable mounting legs

EASY TO MAINTAIN

• Top lifts off for access to coupling or shaft
• Slots in bottom reduce material build-up
• Sectional design. Therefore, it is much easier to install the guard

BUILT TO LAST

• Heavy-duty steel construction
• Available in stainless steel or aluminum
• Increased durability due to powder coating

OPTIONAL SPLIT COUPLING DESIGN

• Ideal for larger couplings
• In addition, our team will recommend which coupling guard is right for you
• View the coupling guard video for a demonstration

ERGONOMIC DESIGN FEATURES & ADDITIONAL OPTIONS OF COUPLING GUARDS

• Handles: Ergonomically friendly handles for easy removal of the guard
• Smart Wedge Clamps: Eliminate the repetitive motion of tightening and loosening fasteners
• Service/Inspection Doors: Eliminate the need to remove the entire guard to access a specific area of the equipment
• Visibility: Allows for inspection without removing the guard due to increased visibility through the guard
• Black Mesh: Improves visibility and allows for the use of touchless measuring equipment
• Sectional Design: Lighter, smaller guards. Hence, it is more manageable to remove sections
• Laser Cut Identification: Easily reference equipment when performing maintenance tasks (optional).

EASY TO INSTALL

• Custom fit for each application
• No need to remove sheaves during installation

EASY TO MAINTAIN

• Bottom slots reduce material build-up
• Front guard removes for maintenance
• The enclosed design increases belt and sheave life

BUILT TO LAST

• Heavy-duty steel construction
• Powder coated for increased durability

ERGONOMIC DESIGN FEATURES & ADDITIONAL OPTIONS OF V-BELT GUARDS

• Handles: Ergonomically friendly handles for easy removal of the guard
• Smart Wedge Clamps: Eliminate the repetitive motion of tightening and loosening fasteners
• Sectional Design: Lighter and smaller guards. As a result, it is more manageable to remove sections
• Removable Front Guard: For easy belt and sheave removal, hence saving a lot of time
• Optional Removable Top: For easy belt adjustment and sheave removal
• Drainage Slots: Reduce material build-up around belts and sheaves
• Shaft Covers: Ensure moving parts are guarded
• Visibility: Allows for inspection without removing the guard due to increased visibility through the guard
• Weight Labels: Creating a visual cue of guard weight before you lift
• Laser Cut Identification: Easily reference equipment when performing maintenance tasks

EASY TO INSTALL

• No need to remove sheaves during installation. Hence, saving time for actual maintenance activities
• Custom fit for each pump application
• In addition, a variety of mounting options available

EASY TO MAINTAIN

• Bottom slots reduce a build-up
• Removable top panel for easy access to sheaves
• Front guard removes for equipment maintenance
• The enclosed design increases belt and sheave life

BUILT TO LAST

• Heavy-duty steel construction
• Powder coated for increased durability

ERGONOMIC DESIGN FEATURES & ADDITIONAL OPTIONS OF PUMP SHAFT GUARDS

• Handles: Ergonomically friendly handles for easy removal of the guard
• Smart Wedge Clamps: Eliminate the repetitive motion of tightening and loosening fasteners
• Hinged Top and Side Panels: Improves ergonomics by adding hinges and handles, so that there is no need to remove the entire guard
• Sectional Design: Lighter, smaller, more manageable sections to remove
• Removable Front Guard: For easy belt and sheave removal
• Drainage Slots: Reduce material build-up around belts and sheaves
• Shaft Covers: Ensure all moving parts are guarded
• Visibility: Increased visibility through the guard allows for inspection without removing the guard
• Weight Labels: Creating a visual cue of guard weight before you lift. Thus, workers won’t be hurt by lifting heavy guards
• Laser Cut Identification: Easily reference equipment while performing maintenance tasks

THEY EASILY MOUNT ONTO EXISTING RETURN IDLER BRACKET. SIDE PANELS HINGE OPEN FOR GUARD MAINTENANCE. TAPERED SIDE SLOTS REDUCE MATERIAL BUILT-UP.

EASY TO INSTALL

• Mounts around existing return idler bracket
• Simply drill 4 holes and bolt to a conveyor frame
• No need to loosen idler bracket, eliminating belt tracking issues
• No welding or cutting required

EASY TO MAINTAIN

• Side panels hinge open for guard maintenance
• There is less material build-up due to tapered side slots

BUILT TO LAST

• Heavy-duty steel construction
• Powder coated for increased durability

ERGONOMIC DESIGN FEATURES & ADDITIONAL OPTIONS

• Smart Wedge Clamps: Eliminate the repetitive motion of tightening and loosening fasteners
• Visibility: Allows for inspection without removing the guard due to increased visibility through the guard
• Hinged Side Panels: Eliminate the need to remove the entire guard while clearing buildup
• Laser Cut Identification: Easily reference equipment when performing maintenance tasks

MODULAR BARRIER GUARDS ARE COMMONLY USED TO SAFEGUARD THE TAIL PULLEY SECTIONS & GRAVITY TAKE-UPS ON CONVEYORS.

EASY TO INSTALL

• Self-supporting structure
• Customized for each application
• As a result, no welding or cutting required

EASY TO MAINTAIN

• Easily handled by one person (all components weigh less than 50 lbs.). Therefore, guards remove in seconds for equipment access

BUILT TO LAST

• Heavy-duty steel construction
• Powder coated for increased durability

COMPLIANT

• OSHA 1910 (Occupational Safety and Health Administration) for Machinery and Machine Guarding
• MSHA 30 CFR 56/57 (Mine Safety and Health Administration) for Moving Machine Parts
• CSA Z432 (Canadian Standards Association) for Safeguarding of Machinery

ERGONOMIC DESIGN FEATURES & ADDITIONAL OPTIONS

• Handles: Ergonomically friendly handles for easy removal of the guard
• Smart Wedge Clamps: Eliminate the repetitive motion of tightening and loosening fasteners
• Service/Inspection Doors: Eliminate the need to remove the entire guard to access a specific area of the equipment
• Access Doors: Full entry to key areas (when proper procedures are in place)
• Visibility: Allows for inspection without removing the guard due to increased visibility through the guard
• Weight Labels: Creating a visual cue of guard weight before you lift
• Laser Cut Identification: Easily reference equipment when performing maintenance tasks

EASY TO INSTALL

• Shipped with mounting hardware
• Custom fit for each application

EASY TO MAINTAIN

• Guard removes in seconds for equipment access
• Multiple holes to mount grease lines or auto greasers (when applicable)

BUILT TO LAST

• Heavy-duty steel construction
• Increased durability due to powder coating
• Available in stainless steel and aluminum

COMPLIANT

• Meets MSHA, OSHA and Canadian Safety Standards

ERGONOMIC DESIGN FEATURES & ADDITIONAL OPTIONS

• Compact Design: Lightweight and sectional designed
• Visibility: Allows for inspection without removing the guard due to increased visibility through the guard
• Weight Labels: Creating a visual cue of guard weight before you lift. As a result, there are fewer workplace injuries
• Laser Cut Identification: Easily reference equipment when performing maintenance tasks